5月6日，GHADDAR Machinery Co. S.A.L從我司訂購1.0 J Single Level Spring Impact Hammer * 1 set, 0.4-1.2N.m Preset Torque Screw Driver * 1 set,可見公司對測試設備的重視度。

1. IEC60068-2-75 Spring-operated Impact-test Apparatus

1. Reference to IEC60068-2-75

2. As Universal Type

1.Introduction:

(1) IEC60068-2-75 Spring Impact Hammer Test Apparatus is strictly designed according to IEC60068-2-75,GB/2423.55-2006.GB4706.1 and GB8898 standard.

(2)After applying the impact with the hammer, the products is examined with accessibility probes to determine

access to chock,energy,and injury hazards. Built in exact accordance to IEC/EN/UL/CSA and other standards.

2.Application:

Adjust the impact severity by rotating the knurled cap until the desired energy-value is displayed. Pull the knob slowly out of the device until it locks in place. If moved too fast, the clamp may skip its arrester and will lock at its way back when the pulling-force declines. Hold the device horizontally at it’s housing tube and press the (black) release cone to the specimens plane of impact. The strike is automatically released when the release force threshold is reached

Impact energy :1 J

Allowable error: ±10%

The weight of impact element: 250g±5g

The power: <10N

The whole weight: 1250g±10g

2. Sundoo SRT-1.2 0.4-1.2N.m Hand Held Preset Torque Screw Driver Tester Meter

Brief Introduction:

   SRT Torque Driver is applied in fasten pieces which have torque request, it can fasten the fastener according to pre-set torque driver. The products have bidirectional load, may pre-set the torque value, if surpasses the setting value, the driver will be idling, it can control the dynamics of thread effectively.

Product Trait:

1.General join head;
2.Bidirectional operation;
3.Preset torque value.